Prosthetics · A single missing tooth
A single missing tooth: bridge or crown?
A comparison of the prosthetic ways of replacing a single missing tooth.
Comparing the options
Two ways, different consequences
A missing tooth (or several) can be replaced in two ways. The first is to place an implant in the gap and fix a crown on it. The second is to replace the missing tooth by anchoring it to the neighbouring teeth.
Below we compare the solutions from a prosthetic point of view. The course of the implant treatment itself is described separately, on the Implant for a single missing tooth page.
Option 1
Three-unit porcelain bridge
A bridge requires the two adjacent teeth that support it to be ground down, and a three-unit porcelain bridge to be fitted. It is permanently joined to the abutment teeth - the patient cannot take it out - and it takes up as much space as the patient's own teeth did before.
The drawback is the need to grind down teeth that are often healthy, and the fact that a bridge can sometimes be awkward to use afterwards.
Option 2
A crown on an implant
An implant does not put a load on the neighbouring teeth, so they do not need to be ground down. For this reason, and also because of what using a bridge involves later on, an implant is a much better solution. The dentist assesses the indications and limitations after diagnostics; not every option is suitable in every case. Sometimes jaw bone restoration is needed before an implant is placed.
What the crown is made of
Choosing the material
Porcelain crowns and bridges can be made on a ceramic (Procera), glass (In-Ceram) or metal framework (galvano gold, titanium, gold or steel alloys). The type of material depends on the patient's cosmetic requirements and on the number of missing teeth.
Procera. All-ceramic restorations (without a metal framework) are suitable for restoring any tooth. We achieve aesthetics close to natural teeth, and the restorations are strong, transmit light, do not change colour and fit perfectly. That is why Procera is recommended especially for front teeth. An example is the all-ceramic Procera Zirconia bridge, designed on the Procera Forte scanner and made from Swedish porcelain - the difference between it and healthy natural teeth is practically imperceptible.
In-Ceram Alumina. Single crowns and all-ceramic bridges with a highly aesthetic result, recommended especially for front teeth; they are biocompatible in the mouth.
Porcelain on gold. Improves the appearance of discoloured, chipped or badly shaped teeth, or teeth with many fillings. As a base, gold fits the tooth structure very precisely, which prevents caries, and it is invisible in the mouth.
Porcelain on steel. Less precise than porcelain fired onto gold, but cheaper.
Synfony composite crowns. Light-cured; they improve the appearance of misshapen or discoloured teeth.
You will find more about the materials on the Prosthetic materials page.
Next step
Book a consultation - we will plan your first visit with care.
A conversation, thorough diagnostics and a treatment plan. No rush, no pressure.