|
 |
 |
One tooth or several teeth defect can be treated in two
ways. First –in a place of a lacking tooth an implant
is grafted and a crown is placed on it. The second way is
replacement of a lacking tooth by supporting it on the adjacent
teeth. However, this requires grinding of two adjacent teeth
and placing a three-point porcelain bridge. The porcelain
bridge is permanently fixed to the tooth pillars –the
patient cannot remove it. It takes as much space as the patient’s
natural teeth before. Its disadvantage however is, that healthy
teeth often require to be ground. From this point of view,
as well as in respect of the uncomfortable later use of the
bridge, an implant seems to be a much more perfect solution.
Porcelain crowns and bridges can be made on the ceramic
foundation (PORCERA), on the glass foundation (In-Ceram)
or the metal one (galvanic gold, titanium, gold or steel
alloys). Using one of those types of material depends on
the patient’s cosmetic requirements and on the number
of lacking teeth.
|
|
PROCERA- crowns and bridges
A full PROCERA porcelain (without a metal foundation) can
be used for reconstruction of all teeth. Dint to the use
of natural ingredients we get the teeth aesthetically close
to the natural ones. Above that, they are twice as durable
as the other ceramic solutions. Crowns and bridges of Procera
porcelain are strong, they conduct light (it gives the effect
of a natural tooth), they do not change their colour, they
are also perfectly fitted. Because of these qualities, Procera
is especially recommended in the front area.
|
|
PROCERA® ZIRCONIA BRIDGE
New strong all-ceramic bridge: Procera® Zirconia Bridge. Enjoy its advantages: all-ceramic bridge with superior beauty and high accuracy to ensure a perfect fit. Enduring beauty, top to bottom. Made possibly by new Scanner Procera® Forte. Brilliant looking teeth that can’t be distinguished from naturals at its best.
|
|
IN-CERAM ALUMINA - crowns and bridges
Single crowns and bridges fully made of porcelain, done
with a IN-CERAM ALUMINA method, give a highly aesthetic effect.
They are bio-consistent in the oral environment and perfectly
precise.
|
|
CROWNS AND BRIDGES -PORCELAIN GOLD - BASED
They improve the cosmetics of discoloured, splintered,
badly formed teeth or the teeth with many fillings. Gold
which forms the founding for the porcelain adheres very precisely
to the tooth tissue and so prevents caries without causing
any infection. It is invisible in the patient’s mouth.
|
|
CROWNS AND BRIDGES –PORCELAIN STEEL - BASED
They are less precise than the porcelain crowns and bridges
gold - based. They are less expensive alternative of the
work done on gold.
|
|
LIGHTHARDENED COMPOSITE CROWNS OF SYNFONY
They improve the aesthetics of the teeth - for discoloured
or badly shaped teeth.
|
|
PORCELAIN VEENER
It improves the aesthetics of the discoloured, splintered,
badly formed or dead teeth. Because of good adhesiveness
of porcelain veeners to the tooth tissue, the condition of
good maintenance of the veener is that teeth must be without
fillings. A porcelain veener does not change its colour.
|
|
 |
|
Prosthetic treatment improves and restores the proper
occlusal system. It not only allows for the cosmetic supplementation
of dental defects, but also for the improvement of aesthetics
of dentition and the face profile.
|
|
|
tooth
crown defect
